Heath Zenith Motion Sensing 3-Way Wall Switch SL-6107 - Manual (Page 13)

-13- 595-4514-14
in the auto mode, light does not stay on:
• Motion is needed to keep the light on.
• Time control is adjusted for too little time. Turn the Time control
clockwise. Note: In the minimum time position, fluorescent lights
may not have enough time to turn on.
in the auto mode, light turns on in daylight:
• Photo adjustment not set properly. Turn the Photo control counter-
clockwise towards the DARK position.
tRoUBLeShooting
technicaL SeRvice
(Do not Send Products)
If you experience a problem, follow this guide. You may also want to
visit our Web site at:
www.desatech.com. If the problem persists,
call* for assistance at 1-800-858-8501, 7:30 AM to 4:30 PM CST
(M-F). You may also write* to:
DESA Specialty Products
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following infor-
mation available: Model Number, Date of Purchase, and Place of
Purchase.
no Service Parts available for this Product