HONDA 2009 Civic Coupe - Manual (Page 334)

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Open the trunk, then remove the
holding clips from the cover, and
remove the cover.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Reinstall the cover, and tighten its
holding clips securely.
The high-mount brake light should
be replaced by your dealer.
2.
1.
3.
4.
5.
CONTINUED
On DX, Canadian DX-G, and LX models
On EX, EX-L, and Si models
Replacing a High-mount Brake
Light Bulb Cleaning the Seat Belts
Lights, Cleaning the Seat Belts
Ma
int
e
na
nce
331
SOCKET
LOOP
BULB
2009 Civic Coupe
Table Of Contents Main Menu