Changing a flat tire – HONDA 2009 Civic Coupe User Manual
Page 355
Advertising
Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Remove the center cap from the
wheel with the extension.
6.
7.
8.
Canadian DX-G model
Changing a Flat Tire
352
WHEEL NUT WRENCH
JACKING POINTS
2009 Civic Coupe
Table Of Contents
Main Menu
Advertising
This manual is related to the following products: