Modulus ii home theater system, Rslm placement, The r.a.b.o.s. sound-level meter (rslm) – Harman-Kardon II User Manual

Page 14: Contents of the r.a.b.o.s. test cd, 12 f

Advertising
background image

10

MODULUS

II HOME THEATER SYSTEM

Power is switched on or off by pressing the button directly below
the bar-graph window. When the unit is on, one or more LEDs will

always be illuminated.The function of the LEDs is described in the

following section.

• Power-On/Low Signal: This is indicated by the illumination of

any LED on the bar graph. If the sound level in the room is
below the measurement range of the instrument, a green LED
near the bottom of the bar graph will be illuminated.

• Normal Measurements: When the sound level is within the

range of the RSLM, the green LED will be off and one of the
red LEDs in the bar graph will be illuminated, indicating the
relative sound level, in decibels (dB).

• Over-Range: If the sound level exceeds the range of the meter,

0dB through –5 will all light simultaneously.

• Low Battery: When the battery voltage is too low for accurate

measurements, an LED at the bottom of the bar graph will be
illuminated. Replace the battery.

Do not attempt measurements when this light is on.

RSLM Placement

Determine where in the room you are most likely to sit when
listening to music or watching a movie.This is where you will
want to hold the RSLM during measurements.The RSLM should
be oriented so it can be easily read and held at your seated ear
level during tests.

You must use this same position for all tests.

The RSLM can be mounted on a standard camera tripod.

This will ensure the best results.

Tracks 53–62 of the R.A.B.O.S.Test CD are test tones that can be
used for general diagnostics of your system. They are not used
for R.A.B.O.S. settings.

The R.A.B.O.S. Sound-Level Meter (RSLM)

The RSLM is a battery-operated, handheld, acoustic measurement
device specifically designed for Infinity R.A.B.O.S. On the face of
the instrument is a light-emitting diode (LED) bar graph that
indicates relative sound level. There are also indicators for
power-on, out-of-range signals and a low battery.

Track

Title

1

Welcome

2

Set System Test Level

3

Set Subwoofer Test Level

4

100Hz Test

5

95Hz Test

6

90Hz Test

7

85Hz Test

8

80Hz Test

9

77Hz Test

10

72Hz Test

11

66Hz Test

12

63Hz Test

13

56Hz Test

14

52Hz Test

15

49Hz Test

16

46Hz Test

17

43Hz Test

18

40Hz Test

19

38Hz Test

20

35Hz Test

21

30Hz Test

22

26Hz Test

23

24Hz Test

24

22Hz Test

25

21Hz Test

26

20Hz Test

27

Intro to Quick Retest

28

Quick Retest 100Hz

29

Quick Retest 95Hz

30

Quick Retest 90Hz

31

Quick Retest 85Hz

Track

Title

32

Quick Retest 80Hz

33

Quick Retest 77Hz

34

Quick Retest 72Hz

35

Quick Retest 66Hz

36

Quick Retest 63Hz

37

Quick Retest 56Hz

38

Quick Retest 52Hz

39

Quick Retest 49Hz

40

Quick Retest 46Hz

41

Quick Retest 43Hz

42

Quick Retest 40Hz

43

Quick Retest 38Hz

44

Quick Retest 35Hz

45

Quick Retest 30Hz

46

Quick Retest 26Hz

47

Quick Retest 24Hz

48

Quick Retest 22Hz

49

Quick Retest 21Hz

50

Quick Retest 20Hz

51

Final System Level Adjustment

52

Final Subwoofer Level Adjustment

53

Wide Band Pink Noise, Left

54

Wide Band Pink Noise,L+R

55

Wide Band Pink Noise, Right

56

Wide Band Pink Noise, L-R

57

Wide Band Pink Noise, Uncorrelated

58

1 to 4kHz Pink Noise, Left

59

1 to 4kHz Pink Noise, L+R

60

1 to 4kHz Pink Noise, Right

61

1 to 4kHz Pink Noise, Left-R

62

1 to 4kHz Pink Noise, Uncorrelated

RSLM bar-graph indications

Contents of the R.A.B.O.S. Test CD

-1

-2
-3
-4
-5
-6
-7

-8

-9

-10
-11
-13
-15
-18

U-R

Batt

R.A.B.O.S. Sound-Level Meter

F

IGURE

12

F

IGURE

13

On

Under-range

Measurement

In-range

Over-range

Low

Battery

Advertising