Harbor Freight Tools 67854 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. Item 67854
91214
Store idle equipment 5. . When not in use,
helmets must be stored in a dry location
to inhibit rust. Always lock up helmets
and keep out of reach of children.
Dress properly
6. . Do not wear loose
clothing or jewelry as they can be caught
in moving parts. Protective gear is
essential to protect against welding rays,
some examples are: a leather welding
apron, welding sleeves, jeans without
cuffs, work boots. Wear restrictive hair
covering to contain long hair.
7. Use eye and ear protection.
When welding, wear ANSI-
approved impact safety
goggles under the Welding
Helmet. Wear a NIOSH-approved
respirator and hearing protection when
welding.
Stay alert
8. . Watch what you are doing,
use common sense. Do not weld when
you are tired.
check for damaged parts
9. . Before
using any helmet, any part that appears
damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. Check
for alignment and binding of moving
parts; any broken parts or mounting
fixtures; and any other condition that may
affect proper operation. Any part that is
damaged should be properly repaired
or replaced by a qualified technician. Do
not use the helmet if any switch does not
operate properly.
Replacement parts and accessories
10. .
When servicing, use only identical
replacement parts. Use of any other
parts can render helmet ineffective,
possibly causing eye damage, and will
void the warranty. Only use accessories
intended for use with this helmet.
Approved accessories are available from
Harbor Freight Tools.
Do not weld if under the influence of
11.
alcohol or drugs. Read warning labels
on prescriptions to determine if your
judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not
weld.
Maintenance
12. . For your safety, service
and maintenance should be performed
regularly only by a qualified technician.
This helmet provides protection for
13.
intended purposes only. There are
certain applications for which this helmet
was designed. Do not modify this helmet
and do not use this helmet for a purpose
for which it was not intended.
The Welding Helmet is not suitable for •
laser welding or Oxyacetylene Welding/
Cutting processes.
The Welding Helmet will not protect
•
against severe impact hazards.
The Welding Helmet will not protect
•
against explosive devices or corrosive
liquids.
Use only at temperatures within the 14.
operating range for your model as
stated on the specifications chart in
this manual.