Hitachi 60EX38B - Manual (Page 23)

SET UP - 23 -
FOLIOHG2
<IMG SRC="ObjFEF.PCX">
PREFERENCE ADJUST Adjust coor, brightness, etc...
PREFERENCE SETTING Improper picture performance
CONVERGENCE ADJUST Match red, green, and blue colors to make white
FOLIOHG2
<IMG SRC="ObjFF0.PCX">
PREFERENCE ADJUST Adjust balance, bass, and treble
PREFERENCE SETTINGS Improve sound performance.
SET UP
FOLIOHG2
<IMG SRC="ObjFEC.PCX">
Select SET UP when setting your TV up for the first time. Use the CURSOR , buttons on the remote to
highlight the function desired.
FOLIOHG2
<IMG SRC="ObjFF1.PCX">
NOTE: To see an auto-demonstration of the on-screen display, press and hold the POWER button on the TV set
for approximately 5 seconds. Press the POWER button on the TV again to end the auto-demonstration.
AIR/CABLE
Select AIR if you are using an indoor or outdoor antenna. Select CATV if you have cable TV.
Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU to exit. Your choice will
be shown on the display.
FOLIOHG2
<IMG SRC="ObjFF2.PCX">