Hitachi 60EX38B - Manual (Page 24)

SET UP - 24 -
RECEPTION BAND
AIR
CATV1 or CATV2
CATV
CHANNEL
Indicated on the
screen
VHF 2-13ch
UHF 14-69ch VHF 2-13 2-13
Mid band A-1
A-5 - A-1
14-22
95-99
Super band J-
W
23-36
Hyper band
W+1 - W+28
37-64
Ultra band
W+29 - W+84
65-125
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
If certain CATV channels are poor or not possible in the CATV1 mode, set AIR/CABLE to CATV2
AUTO PROGRAM
This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip over
unused channels when using the CHANNEL UP ( ) or DOWN ( ) buttons.
FOLIOHG2
<IMG SRC="ObjFF3.PCX">
If the MENU button is pressed while the auto programming function is engaged, programming will stop. See
CHANNEL MEMORY to add or erase additional channels.
CHANNEL MEMORY
Use this function after AUTOPROGRAM to add or erase additional channels to the remote control CHANNEL ,
buttons. Your choice will be highlighted in yellow.
FOLIOHG2
<IMG SRC="ObjFF4.PCX">
Add or erase additional channels while still in CHANNEL MEMORY using the CHANNEL , buttons or
number buttons and then add or erase using the CURSOR , buttons.
CLOSED CAPTION
Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are