Connect the audio – HP de100c User Manual
Page 81
hp digital entertainment center owner’s guide
79
in
st
alli
ng
an
d se
tti
ng
u
p
connect the audio
See “a” on the diagram on page 78.
1
Connect one end of the audio cable to the de100c’s analog OUT jacks, matching red
to red, white to white.
2
Connect the other end to one set of your receiver’s audio IN jacks, matching red to
red, white to white.
Your receiver has several sets of input jacks. Connect the de100c to the CD input jacks or an
AUX set of jacks.
Be sure to set the receiver’s audio input to the corresponding mode when you use your
de100c, as shown here:
note
Digital audio capability is available through the de100c’s OPTICAL and COAX ports. To use
them, purchase the appropriate cables separately.
TUNER
TAPE
AUX1
AUX2
CD
front of receiver
CD
TAPE
TUNER
AUX1
AUX2
back of receiver