HP de100c - Manual (Page 86)

84 hp digital entertainment center owner’s guide
step 4: configure
Using the remote control, follow the onscreen instructions to finish your system setup and
connect to the Internet. Use the arrow keys to navigate among the selections; press SEL to
choose an option.
You can change these settings (and perform the audio test) at any time: From the home menu
select settings. See “setting your preferences” on page 63 for more information.
test the audio
Check the audio connection for left, right, and/or both channels.
If you don't hear music during the test, check that:
■ the audio cables are connected properly between your receiver and your digital
entertainment center
■ your receiver is set to the correct input device (see “connect the audio” on page 79)
■ your receiver’s volume is set high enough (and is not muted)
■ your stereo’s existing audio cables are properly connected from the receiver to your
speakers
If your left/right channels seem reversed, make sure your audio cable connectors are color-
matched to the jacks: red to red, white to white.
note See “about component with multiple inputs” on page 82 and refer to the table on page 83 for
more discussion on device input settings.
set the time zone
Select your time zone. The digital entertainment center automatically set its internal clock.
(There is no additional way to set the clock.)