Henkel KHTF-600 - Manual (Page 2)

Henkel, Inc.
P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171
www.keenovens.com
Model KHTF-600 Re-bake Flux Oven
Installation Instructions & Repair Parts List
One Year Limited Warranty
Henkel, Inc. warrants its products against defects in material and workmanship. Henkel,
Inc. will either repair or replace without charge any properly installed product which fails
under normal operating conditions within one year from date of installation, provided it is
returned to our factory, transportation prepaid, and our inspection determined it to be
defective under the terms of this warranty. The warranty covers only equipment
manufactured by Henkel, Inc., and does not extend to transportation, installation, or
replacement charges at the buyers’ facility; nor does it apply to any other equipment of
another manufacturer used in conjunctions with Henkel, Inc. equipment. No other
warranty, expressed or implies exists beyond that included in this statement.
Capacity 600 lbs. flux
Volts 240 V
W atts 2000 W
Thermostat Proportional - Intergrated
Temperature 0ºF-999ºF
Insulation 4"
Exterior Dimensions 24" X 24" X 64" sloped bottom
Net W eight 250 lbs.
Shipping W eight 283 lbs.
Shipping Dimensions 36" X 30" X 70"
* 480V Single Phase Available
Keen Ovens
Model KHTF-600
Specifications