Operations with units – HP 49g+ User Manual

Page 147

Advertising
background image

Page 3-25

Using UBASE to convert to the default unit (1 m) results in:

Operations with units

Once a quantity accompanied with units is entered into the stack, it can be
used in operations similar to plain numbers, except that quantities with units
cannot be used as arguments of functions (say, SQ or SIN). Thus, attempting
to calculate LN(10_m) will produce an error message: Error: Bad Argument
Type.

Here are some calculation examples using the ALG operating mode. Be
warned that, when multiplying or dividing quantities with units, you must
enclosed each quantity with its units between parentheses. Thus, to enter, for
example, the product 12.5m

× 5.2_yd, type it to read (12.5_m)*(5.2_yd)

`

:


which shows as 65_(m

⋅yd). To convert to units of the SI system, use function

UBASE:


Note: Recall that the ANS(1) variable is available through the keystroke
combination „î(associated with the ` key).

To calculate a division, say, 3250 mi / 50 h, enter it as
(3250_mi)/(50_h)

`:

Advertising
This manual is related to the following products: