Heat & Glo Fireplace Heat & Glo Cosmo-130 - Manual (Page 34)

Heat & Glo • Cosmo-I30, Cosmo-I35 • 2239-900 Rev. H • 1/11 34
B. Vent Kits Components
Direct Vent Flex Liner Kits (see Figure 14.2)
LINK-DV-30B or (LINK-DV-30): Masonry 3 inch fl ex liner
kit. Expands to 30 feet. Includes: two liners, termination
cap, fl ashing, and link adapter.
LINK-DV4-30B or (LINK-DV4-30): Masonry 3 inch fl ex liner
kit. Expands to 30 feet and 4 feet respectively. Includes:
two liners, termination cap, fl ashing, and link adapter.
Figure 14.2 Direct Vent Flex Liner Kits
Figure 14.3 Direct Vent Flex Liner Accessory Kits
Direct Vent Flex Liner Accessory Kits (see Figure 14.3)
Flash-Damp: Zero clearance damper fl ashing kit for use
with the LINK-DV-30B or LINK-DV4-30B liner kits.
LINK-ZC-ADP: Zero clearance chimney adapter
DV-46DVA-GK: Adapter kit (colinear to coaxial 3 inches
included in above kits). It is permissible to use DV-46DVA-
GK to connect collinear fl ex vent to SL-D vent pipe to
extend the run.
FLEX3-30: One 3 inch fl exible liner expands to 30 feet.
FLEX-CNCT: Connector kit - 3 inch liner to 3 inch liner,
one connector per kit.
FLASH-DAMP
FLEX3-30
LINK-DV-30B
(LINK-DV-30)
LINK-ZC-ADP
DV-46DVA-GK
FLEX3-CNCT
LINK-DV4-30B
(LINK-DV4-30)

