HP L1619A - Manual (Page 48)

48 User’s Guide
Maintaining the System
To manage the projector using the on-screen menu
The projector’s on-screen menu is described in detail in the projector manual.
However, when you install an attachment module, certain new menu entries are
displayed in the on-screen menu.
New menu entries with module installed
Quick choice
Wireless Presenter Displays information needed by Wireless
Presenter-to-Go so it can connect to the projector.
Input
Attachment module Shows the input signal from the current wired or
wireless presenter.
Setup
Network Sets up TCP/IP settings for the wired network port.
If the network uses a DHCP server, you must set
only the DHCP option. Check with the network
administrator.
Wireless reset Resets all wireless network settings to default values
(only for certain firmware versions).
Help
About the network Displays the current configuration of the wired and
wireless network ports on the attachment module.
The wireless configuration and certain wired
settings must be changed using the Web interface.
See “To manage the projector from the Web” on
page 49.