Hitachi CP-S860E - Manual (Page 11)

11
Names and functions of each part (continued)
Loading the batteries Loading AA batteries into the remote control.
The laser pointer of the remote control is used in place of a finger or rod.
Never look directly into the laser beam outlet or point the laser beam at
other people.
The laser beam can cause vision problems. Warning
AVOID EXPOSURE-
LASER RADIATION IS
EMITTED FROM THIS
APERTURE
1 Remove the battery
cover.
Press the battery cover
and slide it in the
direction of the arrow.
2 Loading the batteries.
Make sure the plus and
minus poles are correctly
oriented.
3 Close the battery cover.
Battery usage cautions
•
Use only the specified batteries with this
projector. Also, do not mix new and old
batteries. This could cause in battery cracking or
leakage, which could result in fire or personal
injury.
•
When loading the batteries, make sure the plus
and minus poles are correctly oriented as
indicated in the projector. Incorrect orientation
could cause battery cracking or leakage, which
could result in personal injury or pollution of the
surrounding environment.
Caution Remote control usage cautions
•
Do not drop the remote control or apply impact.
•
Do not wet the remote control or place it on any
wet object. Such actions could result in
malfunction.
•
When not to be used for an extended period,
remove the batteries from the remote control.
•
Replace the batteries when remote control
operation becomes difficult.
•
Do not place the remote control close to the
cooling fan of the projector.
•
Do not disassemble the remote control in case of
malfunction. please bring it to the service station.
Caution
C A U T I O N
LASER RADIATION-
DO NOT STARE INTO BEAM
W A V E L E N G T H : 6 5 0 n m
M A X . O U T P U T : 1 m W
CLASS 2 LASER PRODUCT
RADIAZIONI LASER
NON GUARDARE NEL RAGGIO LUCE
APPARECCHIO LASER DI CLASSE 2
RAYONNEMENT LASER
NE PAS REGARDER DANS
LE FAISCEAU APPAREIL
A LASER DE CLASSE 2
LASER-STRAHLUNG
NICHT IN DEN STRAHL
BLICKEN LASER KLASSE2
MANUFACTURED
PLACE OF
MANUFACTURER:
A
MADE IN JAPAN
IEC60825-1:1993+A1:1997