Hitachi CP-S860E - Manual (Page 16)

16
1
Press the MAGNIFY
+
button.
• The center part of the image will be displayed magnified approximately two times.
2 Press the MAGNIFY
+
button.
• When this button is pressed, the image will be displayed even larger.
3 Press the MAGNIFY – button.
• When this button is pressed, the image will be displayed even smaller.
4 Press the POSITION button.
5
Press the DISK PAD up, down, left and right buttons.
• The magnified area will move in accordance with the button pressed.
6
Press the MAGNIFY OFF button.
VIDEO
STANDBY/ON
RGB
POSITION
LASER
MENU
RESET
MAGNIFY
FREEZE
OFF
VOLUME
P in P MUTE
AUTO BLANK TIMER
Magnify function
Changing the magnification ratio
Moving the display area
Returning to normal display
1,2
3
5
4
6
Part of an image can be displayed magnified. This function can
be used together with the FREEZE function (refer to page 10).
Basic operations (continued)
• The magnify function will be cancelled when the input select button is pressed or the display
mode of the PC being used for display is changed.
• Cancelled when the magnified display or menu display is on.
Caution