Hitachi CP-S833E - Manual (Page 7)

7
Main unit
Lens
Speaker Speaker
Remote control
sensor
· Use the remote control transmitter within
the range of about 16 feet from the remote
control sensor and within 30
°to both the
left and right.
Cooling fan
(exhaust)
Names and functions of each part
Handle
ON indicator
This blinks in the standby mode and lights
in the operation mode.(See page 31)
STANDBY / ON button
Power ON/OFF button.
OFF sets the unit in standby mode.
(see page 12
~ 13)
LAMP indicator
This lights or blinks when the lamp does
not light. (See page 31)
TEMP indicator
This lights or blinks when temperature
inside the projector is too high or when fan
is abnormal.(See page 31)
INPUT button
To select the input source.
Each time this button is pressed, the input
source is changed in sequence as shown
below.
ZOOM knob
Adjusts picture size.
(See page 12)
FOCUS ring
Adjusts focus.
(See page 12)
MENU button
Picture adjustments.
Refer to page 15~18 for details.
RESET button
Resets unit to factory settings.
(See page 15)
Lens cap
MUTE button
Silences the sound. (Cancels the mute
when the unit is set in mute mode.) RGB1 RGB2 VIDEO1 VIDEO2
RESET
MENU
MUTE INPUT
LAMP TEMP
ON
STANDBY/ON