Hitachi L22DP03U - Manual (Page 12)

- 11 -
between the CVBS Video In socket on the TV and the VIDEO OUT jack on your device to make
such a connection.
YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects
to the TV via YPbPr sockets.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device
to enable component audio.
PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
RF Input connects to an antenna or a cable.
Note: that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate antenna cable.
SCART inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode.
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you
subscribe to. For more information, see “Common Interface” section.
Disc loading slot
Insert a DVD disc into this slot.
NB. press the button on the remote control to select DVD mode.
ENG-01-TV-22856W-1165UK-MB29-UKIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10059170-50138225.p65 18.11.2008, 09:15 11