HP 409054-003 - Manual (Page 31)

Local port operation 31
Keystroke Description
Esc Closes the current dialog box without saving changes and returns to the
previous dialog box. In the Main dialog box, it closes the OSD and returns to
the selected server. In a message box, it closes the message box and returns to
the current dialog box.
Alt+Hotkey Opens dialog boxes, selects options, and executes actions when used in
combination with the other keys.
Alt+X Closes the current dialog box and returns to the previous dialog box.
Alt+O Selects the OK button and returns to the previous dialog box.
Enter Selects the highlighted server and closes the Main dialog box.
Single-click, Enter Selects the text, in a text box, for editing and enables the left and right arrow
keys to move the cursor. Press the Enter key again to quit Edit mode.
Print Scrn, Backspace Toggles back to the previous server console selection
Print Scrn, Alt+0 Disengages the user immediately from a server and leaves no server selected.
The status Flag appears as Free. (This command applies only to the 0 key on
the keyboard, not to the 0 key on the keypad.)
Print Scrn, Pause Activates the Screen Saver mode immediately and prevents access to that
particular console if it is password protected.
Up or Down arrows Moves the cursor from line to line.
Right or Left arrows Moves the cursor between columns. When you are editing a text box, these
keys move the cursor within the column.
Page Up or Page Down Pages up and down through the Name and Port lists.
Home or End Moves the cursor to the top or bottom of a list.
Backspace Erases characters in a text box.
Delete Deletes the current selection in the Scan dialog box or deletes the characters in
a text box.
Shift, Delete Deletes the current selection and all lines below it when you are editing a
scan list.
Numbers Adds numbers from the keyboard or keypad.
Caps Lock Disables the selected user. (Use the Shift key to change case.)
Managing routine tasks for servers
You can configure the console switch and manage routine tasks for your servers from the Setup dialog
box within the OSD. To identify servers by unique names, click Names when initially setting up your
console switch.