HP 409054-003 - Manual (Page 36)

Local port operation 36
2. Click Modify. The Device Modify dialog box appears.
3. Select the number of ports supported by the cascaded Compaq Server Console Switch.
4. Click OK.
5. Repeat steps 2 through 4 for each port to which you want to assign a device type.
6. Click OK in the Devices dialog box to save settings, click X to exit, or press the Esc key to exit
without saving settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the
Devices dialog box.
Changing the keyboard language
You can select the keyboard language for all USB interface adapters connected to the console switch.
1. From the Main dialog box (" Accessing the Main dialog box " on page 28 ), click Setup>Keyboard.
The Keyboard dialog box appears.
2. Select the Keyboard Country Code.