Hp color laserjet 9500 printer updates, Firmware revision – HP Volume 23 User Manual

Page 8

Advertising
background image

HP Color LaserJet 9500 printer updates



Firmware revision

The 20040113 05.004.2 firmware revision is

now available from HP at the following URL:

www.hp.com/go/clj9500_firmware

. You may

see improvements to the following issues after

installing the updated firmware:

After storing a large number of jobs on the

hard drive, the printer may generate a

49.4C06 error when printing a menu map.

An endless calibration loop may occur when

a CPR (color plane registration) retry is

followed by an internal request for

calibration.

Slow printing with PCL 5c occurs when a

foreground color is selected and the current

palette at the time of selection has a

DirectByPixel raster format.

Printer displays a 49.FF06 error when a

single user has 10 or more private stored

jobs and selects to print ALL PRIVATE JOBS.

Certain PostScript® files generate a 49.4C02

error.

Bold PostScript text from Macintosh systems

does not render properly.

Using the Multifunction Finisher and printing

Face-Up or Face-Down the job flips

orientation within the first couple of pages or

after an internal calibration.

Some PDF files placed in Quark Xpress may

cause a PostScript error.

Sending a large number of fonts to the hard

drive causes a 49.0508 error when printing

the PostScript font list.

Inability to upgrade firmware using the

HP LaserJet Utility on the Macintosh platform.

(Resolution of this issue will occur after

upgrading this firmware version using a

program other than the HP LaserJet Utility.)

PostScript errors may occur when printing

DCS2 files created from a non-HP scanner.

When the control panel lock function is set to

MAX with HP Web Jetadmin, the paper tray

settings may be altered by opening and

closing a tray.

Firmware datecode: 20040113 05.004.2

Objects and/or text are missing or printed

incorrectly when using a third-party DIMM

solution.

When the PCL 5 pre-punched media

command precedes the duplex command, the

output is correct. When the commands are

reversed, pages are rotated incorrectly.

49.0E00 error when printing some PDF files

with the PostScript driver.

“µ” prints italicized with certain PostScript

typefaces.

Images printed from tray 4 may be offset

beyond what the SET REGISTRATION control

panel setting can adjust.

CMYK images have a difficult time printing

highlights below 10 percent.

HP Color LaserJet 9500 series printer

HP Color LaserJet 9500 printer updates

8

Advertising