HotBrick VPN 800 - Manual (Page 69)

HotBrick Network Solutions
Page 65
Syslog Configuration
Syslog Global • Enable – Set to “enable”, if you want to send system log messages to
other machine.
Keep Sent Messages • Enable – Checked this, if you want to keep sent messages, otherwise
the sent messages will be deleted.
Syslog Server • IP address: Up to 3 syslog servers can be used.
• Enable: You can enable or disable each server temporarily.
• Port: If your syslog server does not use the default port, you can change
it.
• Log Priority Level: The syslog messages are divided into 8 levels, from
Emergency to Debug level. The lower level, the less messages will be
generated. Emergency is the lowest priority level, and Debug is the
highest one.