HotBrick VPN 800 - Manual (Page 72)

HotBrick Network Solutions
Page 68
9: Advanced LAN Configuration
Overview
These screens and settings are provided to deal with non-standard situations, or to provide additional
options for advanced users.
Existing DHCP Server
If your LAN already has a DHCP Server, and you wish to continue using it, the following configuration
is required.
• The DHCP Server function in the Load Balancer must be disabled. This setting is on the LAN &
DHCP screen.
• Your DHCP Server must be configured to provide the VPN 800/2 Firewall Router's LAN IP
address as the "Default Gateway".
• Your DHCP Server must provide correct DNS addresses to the PCs.
Routing
This section is only relevant if your LAN has other Routers or Gateways.
• If you don't have other Routers or Gateways on your LAN, you can ignore the Routing page
completely.
• If your LAN has other Gateways and Routers, you must configure the Static Routing screen as
described below. You also need to configure the other Routers.
Figure 9-1: Routing