Hitachi VT-F462A - Manual (Page 30)

CHANNEL TUNING
30
6. Press button "1" to select "ANT.", "CATV1" or "CATV2". If your VCR is connected to a home antenna
system, select "ANT."; select "CATV1" when your VCR is connected to a cable antenna. Switching is
performed between "ANT.", "CATV1" and "CATV2" on the TV screen every time button "1" is pressed.
INITIAL SETUP
1 ANTENNA/CABLE <CATV1>
2 AUTO CHANNEL SETTING
3 ADD OR ERASE CHANNEL
4 VCR CODING
<VCR1>
5 MOVIE RETURN <ON>
6 AUDIO PLAYBACK <HIFI>
7 STEREO/MONO
<STEREO>
8 SECOND AUDIO <OFF>
*TO END PRESS GUIDE
NOTE: Usually select "CATV1" when your VCR is connected to a cable antenna. "CATV2" is to be selected in
special cases. See page 21 for details.