HTC Mogul - Manual (Page 20)

12 Section 1: Getting Started
1.3 Battery Information
Your device comes with a rechargeable Li-Ion polymer battery. Use only manufacturer-specified original batteries
and accessories with your device. Battery performance depends on many factors, including network configuration,
signal strength, the temperature of the environment in which you operate your device, the features and/or settings
you select and use, items attached to your device’s connecting ports, and your voice, data, and other program usage
patterns.
Warning: To reduce risk of fire or burns, do not disassemble, crush, puncture, short
external contacts, heat above 60
o C (140 o F), or dispose of in fire or water. Replace only
with manufacturer specified batteries. Recycle or dispose of used batteries according
to the local regulations.
Installing and Charging the Battery
New batteries are shipped partially charged. Before you start using your device, you need to install and charge
the battery.
To install the battery:
1. Press the battery cover latch downward to release the battery cover.
Press the battery cover latch downward
and then remove the battery cover.
2. Remove the battery cover.
3. Insert the battery by aligning the exposed copper part of the battery pack with the protruding copper
conductor located on the upper end of the battery compartment. Insert the upper side of the battery
first, and then gently push the battery into place.
4. Replace the battery cover.