Humax CX PVR-9200C - Manual (Page 46)

6.9 Recording’s Start/End Time
You can set the start/end time of recording.
1. Press the MENU button.
2. Select Record using the button and press the OK or
button.
3. Select Recording’s Start/End Time using the button and
press the OK or button.
4. Select the time using the button and press the OK
button.
6.10 Re-recording
You can re-record the recorded file.
1. Press the RECORD button at the point you want to record while playback.
2. Press the STOP button to stop recording. A pop-up message will appear. Select Yes and press the OK
button. Then the recording will stop but the playback will continue.
3. To find new recorded files in the play list, press the PLAY LIST button.
GB 45