Gb 83 – Humax CX PVR-9200C User Manual

Page 84

Advertising
background image

8. Cannot update new software.

**

•

You can get an update. If the product does not show a message requesting update, that means no software is
available.

9. Cannot watch scrambled channels.

**

•

Check that you have the appropriate Smartcard or CI-Module. Reinsert the Smartcard or CI-Module and make
sure it initializes correctly.

•

Check in the menu that the product is detecting the Smartcard or CI-Module.

•

Check in the menu that you have a valid and working subscription to the channels you wish to view.

•

Ensure that the Smartcard or CI-Module is not damaged.

10.Cannot watch pay channels.

**

•

Check in the menu that you have a valid and working subscription to the channels you wish to view.

•

Contact your network operator for more information.

11.Cannot record progammes.

**

•

The hard disk is full. Delete unnecessary programmes and make space for new recording.

•

Check if recording is overlapped with another channel. Stop the current recording or wait until the recording is
finished.

12.Cannot operate the TSR.

**

•

The TSR may not be available during the recording. Wait until the recording is finished.

•

Delete unnecessary programmes and make space for new recording.

13.The product makes a humming noise.

**

•

The noise is from the fan; the hard disk is operating normally. This kind of noise is inevitable but seldomly
noticeable.

14.Cannot playback.

**

•

To play back the recorded file of a scrambled channel, use the Smartcard. In case it has been a long time
since you last recorded, this may not work. Contact the product distributor.

•

The signal during the recording may be weak or the hard disk too full.

15.Cannot change channel while recording.

**

•

Certain channels may not be changed due to restriction of the tuner type.

GB 83

Advertising