HONDA 08E91-E22-100B - Manual (Page 10)

10 of 22
AII 38215-38958 (0802) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
32. Secure the antenna cable to the vehicle harness
with a wire tie. Secure the wire tie between the
vehicle harness branching points.
6D01281T
VEHICLE
HARNESS
WIRE TIE
ANTENNA
CABLE
BRANCHING
POINT
Installing the Control Unit Bracket
33. Locate the small square hole next to the small
round hole in the dashboard support bracket.
Under the dashboard, attach the control unit
bracket to the vehicle bracket near the front lower
pillar using a flange nut. If the vehicle is equipped
with a moonroof, be careful not to pull on the drain
tube.
6D01123T
VEHICLE
BRACKET
CONTROL UNIT
BRACKET
FRONT
FLANGE
NUT
VEHICLE
BRACKET
www.collegehillshonda.com