HONDA 08E91-E22-100B - Manual (Page 22)

22 of 22
AII 38215-38958 (0802) © 2008 American Honda Motor Co., Inc. - All Rights Reserved.
How to Program an Additonal Transmitter
1. Connect the HDS to the data link connector.
2. Start the HDS and click on the car icon.
3. Input the vehicle's VIN and other required
information.
4. Select Honda Systems.
5. Select R/C Engine Starter.
6. Select REGISTER NEW TRANSMITTER.
7. When "Ready to program the new transmitter"
shows, select ENTER.
8. Press and release the Command button.
9. Press and release the Stop button.
10. Perform the function check on both transmitters.
NOTE: Only 2 remotes can be stored in the
system's memory.
www.collegehillshonda.com