Pre-operation check, Engine oil, 28 pre-operation check – HONDA EU2000i User Manual
Page 30
28
PRE-OPERATION CHECK
ENGINE OIL
AMBIENT TEMPERATURE
SAE VISCOSITY GRADES
COVER SCREW
MAINTENANCE
COVER
Check the oil level BEFORE EACH
USE with the generator on a level
surface and the engine stopped.
SAE 10W-30 is recommended for general, all-temperature use. Other
viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.
Engine oil is a major factor affecting engine performance and service
life. Non detergent and 2-stroke engine oils will damage the engine
and are not recommended.
Loosen the cover screw and remove the maintenance cover.
Use 4-stroke motor oil that meets
or exceeds the requirements for
API service classification SJ. Al-
ways check the API SERVICE label
on the oil container to be sure it in-
cludes the letter SJ or higher.
1.
04/06/28 11:04:37 31Z07600_029