Hitachi CP-SX8350 - Manual (Page 13)

13
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table ( & 19 ).
Command Control via the Network
LAN
USB wireless adapter
LAN cable (CAT-5 or greater)
Connection
1. Turn off the projector and the computer.
2. If you use wired LAN, connect the projector's LAN port to the computer's
LAN port with a LAN cable. Use the cable that fulfills the specification shown
in figure. If you use wireless LAN, insert the USB wireless adapter into one of the
USB TYPE A ports of the projector.
3. Turn the computer on, and after the computer has started up turn the
projector on.
NOTE • If data is transferred via wireless and wired LAN at the same
time, the projector may not be able to process the data correctly.
Command Control via the Network