Pc connect, With pc connect cable only) – Humminbird 531324-1_D User Manual

Page 28

Advertising
background image

22

GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart
shows the location of each visible GPS satellite with its satellite number and a signal strength
bar. A dark grey bar indicates that the satellite is being used to determine your current position.
A light gray bar indicates that the satellite is being monitored, but is not yet being used.

NOTE: The GPS Diagnostic View only appears if the GPS Receiver is connected.

This view also reports the current position, local time and date, and other numeric information.
The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An Enhanced fix has
been augmented using information from WAAS, EGNOS, or MSAS. A 3D or Enhanced Fix is
required for navigation. HDOP (the Horizontal Dilution of Precision) is a GPS system parameter
which depends on the current satellite configuration. HDOP is used to calculate the Estimated
Position Error.

PC Connect

(With PC Connect Cable Only)

Use PC Connect to update the software of the Fishing System control head. This feature
requires the use of the PC Connect Cable. Complete instructions are included with the PC
Connect Cable accessory.

NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at
www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.

Exit PC Connect mode by powering the Fishing System off.

GPS Diagnostic View

Satellite Being

Monitored

Satellite
Being Used

Current Latitude

and Longitude

Sky Chart

Advertising