Humminbird 531324-1_D - Manual (Page 41)

Track Min Distance
(Advanced)
Track Min Distance allows you to set a minimum distance of travel before a trackpoint is added
to the track. The Track Min Distance menu choice is only available when User Mode is set to
Advanced (see The Menu System: User Mode).
NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both conditions must be
met before a trackpoint is added to the current track.
To change the Track Minimum Distance setting:
1. Make sure you are in Advanced User Mode, then highlight Track Min Distance on the
Navigation main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Track Min Distance setting. (1 to 300
feet or 1 to 100 meters [International Units Only], Default = 16 ft, 5 m)
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min Distance to small
values will allow you to increase the track resolution.
Map Datum
(Advanced)
Map Datum allows you to change the track plotter coordinate system used by the Fishing
System to match those of a paper map. The Map Datum menu choice is only available when
User Mode is set to Advanced (see The Menu System: User Mode).
To change the Map Datum setting:
1. Make sure you are in Advanced User Mode, then highlight Map Datum on the
Navigation main menu.
2. Press the LEFT or RIGHT Cursor keys to change the Map Datum setting.
(Default = WGS 84)
35