Hach 6120118 - Manual (Page 19)

19
Section 4 User Interface and Navigation
4.1 Using the sc100 Controller
The front of the controller is shown in Figure 12 . The keypad consists of the eight keys
described in Table 5 .
Figure 12 Front of the Controller
1. Instrument display 5. IrDA window
2. BACK key 6. HOME key
3. MENU key 7. ENTER key
4. RIGHT, LEFT, UP, and DOWN keys
Table 5 Controller Key Functions/Features
Number Key Function
2 Moves back one level in the menu structure.
3
Moves to the main menu from other menus. This key is not active in menus where a selection or
other input must be made.
4 Navigates through the menus, changes settings, and increments and decrements digits.
5
Moves to the Main Measurement screen from any other screen. This key is not active in menus
where a selection or other input must be made.
6 Accepts an input value, updates, or accepts displayed menu options.
sc100
1
2 6
5
3 7
4