Honeywell FUSION - Manual (Page 51)

SETUP OPTIONS
5–7
5.4 GENERAL SETUP, CONTINUED
8 Auto Sequencing
Time (sec)
When the Loop button is activated, the Auto
Sequencing Time specifies the amount of time that
elapses before switching to the next Screen Division
group.
9 No Sequencing on 0
FPS Does not sequence through cameras that have 0 FPS
specified.
10 Audio Opens the Audio enable/disable options.
11 TV Out Setup Opens the TV Out setup options.
12 Volume Opens the Volume controls that affect the Audio
Recording levels.
13 Video Loss Alarm These options allow video loss to be designated as an
alarm.
14 Intensive Recording Opens the Intensive Recording window which allows
you to specify the Pictures per second to be recorded.
5.4.1 VOICE WARNING
The DVR unit can be set to play a sound file when either a Motion or Sensor event
occurs. This file can be a custom created sound file that is unique to your application.
The selected WAV file is played through speakers attached to the DVR unit.
1 3 2 4
1 Activate on Motion Enables the voice warning on motion events.
2 Sensor Event Enables the voice warning on sensor events.
3 Play Selected WAV Plays the selected WAV file.
4 Browse Used to select the location of the WAV file to use.