Load clothes into dryer auto dry cycle – haier GDE700AW User Manual

Page 17

Advertising
background image

English

16

• The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too

much load, space is needed to allow clothes free rotation for uniform and
wrinkle proof drying.

• When drying big articles, only 2-3 pieces shall be loaded at a time and

supplemented with small and medium sized articles.

• For delicate clothes or less load, two towels may be added to get better

drying and wrinkle-proof effects.

• Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness,

electro static charges accumulation and more lint.

Rack Dry cycle

• This program is designed specially for articles like sport shoes. During drying

please make sure the articles are placed on the rack with no risk of
entangling the baffles while drum is rotating.
Note: If drying rack is not in place, rolling inner tub could collide with drying

rack and causes damage to the dryer and drying rack.

LOAD CLOTHES INTO DRYER

AUTO DRY CYCLE

1.Press any button except "Off" button to power on.

• Turn on the power switch, the computer board beeps once and the

dryer transfers from off status to the initial operating status (Normal program).

• If no "Start/Pause" button is pressed in 5 min after powering on, it

automatically cuts off power and returns to off status.

• It returns to off status immediately upon end of a cycle; Whatever status

the computer board is (start, pause, alarm etc.). Pressing "Off" button will
stop all operations and it enters off status.

• Various button initial status for "Normal program".

Advertising
This manual is related to the following products: