haier GDE700AW - Manual (Page 18)

English
17
2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle.
• The Normal program will be automatically selected after powering on. If
another full automatic program is desired, press "Auto-Dry Cycles" button
until corresponding indicator turns on.
• To select your desired settings the "Custom" function should be chosen.
• It can memorize programs defined by user and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Auto-Dry Cycles" until"Custom" status, then set
"Timed-Dry Cycles" to Timed Dry or Rack Dry, and set status of other buttons.
Press "Start/Pause" button or after half a minute, the program defined by user
himself will be stored and will be directly displayed upon next use.
Notes: Pressing "Sensor Dry Level" button will be inactive during use of "Custom"
function.
3. Press "Sensor Dry Level" button to select a suitable drying time.
• After powering on, the clothes dryer automatically sets dryness at "very", which
means a longer drying time. If other drying time is desired, press "Sensor Dry
Level" button to select a shorter time.
Cycle Signal Softer
Wrinkle Care Off
Cycles Normal
LED display Indicate current program remaining time
Temp High
Sensor Dry Level More Dry
Timed/Cycles Auto-program
Casua l
Delicate
Touch Up
Custom
Normal
Heavy
Cotton
Bulky Items
Auto-Dry Cycles