Hitachi C43-FD7000 - Manual (Page 12)

12
GETTING STARTED 
Power on/off
TO TURN THE POWER ON
Press the POWER button on the TV set. The power indicator will light up to indicate that the power is on.
WHEN THE SET IS AT STANDBY
The TV will be in standby mode and the blue power indicator becomes dimmer if the
TV set is turned off using the button on the remote control unit. This indicates
that the TV is not powered off completely and is in low power consumption mode,
waiting for your new command at anytime.
You can turn on the TV set using the button on the remote control unit. The
picture will appear in a few seconds. You can also press the PROG
+/- buttons on the
front panel to turn it on.
TO TURN THE POWER OFF
Press the POWER button on the TV set to turn it off. The power indicator will go off.
CAUTION: If you are not going to use this set for a long time, turn off the set using
the POWER button on the TV set and disconnect the plug from the
power outlet.
POWER indicator
POWER button