HP PAVILION DX6500 - Manual (Page 48)

6 . Release the display bezel bottom edge (3).
7 . Remove the Phillips PM2.0×4.0 screw (1) that secures the display inverter to the display enclosure.
8 . Release the display inverter (2) as far as the display panel cable and the backlight cable allow.
9 . Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
10 . Remove the display inverter.
Reverse this procedure to install the display inverter.
40 Chapter 4 Removal and replacement procedures