HP PAVILION DX6500 - Manual (Page 71)

6 . Remove the following:
(1) One Phillips PM2.0×3.0 broad-head screw
(2) Two Phillips PM2.5×3.0 broad-head screws
(3) Two Hex HM5.0×9.0 standoffs
(4) One Phillips PM2.5×6.0 screw
7 . Turn the computer right-side up, with the front toward you.
8 . Release the ZIF connector to which the TouchPad cable is connected and disconnect the TouchPad
cable (1) from the system board.
9 . Remove the following screws:
(2) Two Phillips PM2.5×5.0 screws that secure the top cover to the computer
(3) One Phillips PM2.5×6.0 screw that secures the top cover trim to the computer
10 . Remove the top cover trim (1). The top cover trim is available using spare part number
431421-001.
Component replacement procedures 63