HP PhotoSmart 850 - Manual (Page 61)

Chapter 5: Unloading, printing, and displaying images 61
To print directly to a USB-enabled HP printer:
1 Your camera came with a special USB
cable for connecting the camera
directly to a printer. Connect the square
end of the USB cable to the printer.
2 Open the rubber door on the side of
the camera and connect the small end
of the USB cable to the USB connector
on the camera.
3 Adjust the settings in the Print Setup
menu on the camera to complete the
printing process.
Displaying images on a TV
Images in your camera can easily be displayed as a slideshow
on almost any TV (television).
NOTE You can also use the optional HP Camera Dock to do
this task. See Appendix B: Camera dock on page 95.
1 To connect the camera directly to a TV, you must first
purchase an A/V (Audio/Video) cable. For more
information, see Purchasing camera accessories on
page 93.
2 On the camera, check that the TV configuration option in
the Setup menu is set correctly for your area. See TV
configuration on page 68.
3 Refer to the documentation for the TV to determine how to
set the TV to take video input from an external video source
(your camera) instead of the antenna or cable TV.