HP PhotoSmart 850 - Manual (Page 67)

Chapter 6: Adjusting the camera settings 67
USB configuration
This Setup menu option determines
how the camera appears when
connected to a computer.
z
Digital Camera —Causes the
computer to recognize the
camera as a digital camera using
the Picture Transfer Protocol (PTP)
standard. This is the default setting on the camera. Use this
setting for unloading and sharing on either a Windows
computer that has the HP Photo & Imaging software
installed on it, or on a Macintosh OSX computer that does
not have the HP Photo & Imaging software installed on it.
z
Disk Drive —Causes the computer to recognize the camera
as a disk drive using the Mass Storage Device Class
(MSDC) standard. Use this setting for unloading and
sharing on either a Macintosh computer, or on a Windows
computer that does not have the HP Photo & Imaging
software installed on it.