Hitachi CP-X2510N - Manual (Page 27)

27
3. Network Functions
3.1 Configuring and controlling the projector via a web browser (continued)
Click [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
NOTE
Item Description
Network Control
Configures the Authentication password for the command
control.
Authentication
Password
Configures the Authentication password. The length of the text
can be up to 32 alphanumeric characters.
Re-enter
Authentication
Password
Reenter the above password for verification.
SNMP Configures the community name if SNMP is used.
Community name
Configures the community name. The length of the text can be
up to 64 alphanumeric characters.