Hitachi CP-X2510N - Manual (Page 49)

49
3. Network Functions
3.8 Controlling the external device via the projector
(using the NETWORK BRIDGE function)
This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
Using the NETWORK BRIDGE function, a computer that is connected with
this projector by Ethernet communication can control an external device that is
connected with this projector by RS-232C communication as a network terminal.
3.8.1 Connecting devices
1) Connect the projector’s LAN port and the computer’s LAN port with a LAN
cable, for Ethernet communication.
2) Connect the projector’s CONTROL port and the device’s RS-232C port with
an RS-232C cable, for RS-232C communication.
• Before connecting the devices, read the manuals for the devices to
ensure the connection.
For RS-232C connection, check the specifications of each port and use
the suitable cable. ("Connection to the ports" in the User's Manual -
Operating Guide (Technical))
NOTE
RS-232C
RS-232C cable
CONTROL port LAN port
External device
Ethernet
LAN cable
Computer
Protocol change TCP/IP data Serial data