Harman-Kardon HS 500 - Manual (Page 33)

33
INITIAL SETUP
Step Six – Configure Sources
This is the last step in the configuration process. It is necessary so
that the correct inputs are selected as you use various sources with
your HS 500.
NOTE: If you have not connected any devices to the TV or D-IN
input jacks on the HS 500, then you may skip this step. You are
now ready to begin enjoying the finest in home entertainment
using your HS 500 system. Turn to the Operation section to
learn how to make the most of the many features of the
HS 500.
Select the TV, AUX or D-IN source either by pressing its Source Selector
on the remote (see Figure 47), or by pressing the OSD button and
using the
‹/› Buttons to select the source from the list at the top of
the screen. See Figure 48 for the screen for the TV source.
Figure 47 – Source Selectors
Figure 48 – TV Source Menu
Press the Enter Button to access the TV menu settings, and use the
¤ Button to select the Audio Input setting. Press the Enter Button
to display the input options: Coaxial or Optical (digital audio) or Line
(analog audio). Use the
‹/› buttons to select the input to which
you connected your TV’s audio output, and press the Enter Button.
You may also select a surround mode for this source at the Audio
setting line, and you may adjust the volume level for this source at the
Level Adjustment setting line, but it is not necessary to make these
adjustments now. These settings only apply to the TV source.
To configure the D-IN (Digital Input) source, use the Navigation Buttons
to highlight D-IN on the top line, and press the Enter Button to access
the settings for the D-IN source. See Figure 49.
Figure 49 – Digital Input (D-IN) Source Menu
Use the ¤ Button to select the Digital Input setting line, and press the
Enter Button to view the options of Coaxial or Optical digital audio input.
Select the input to which you have connected the source device you
wish to listen to, and press the Enter Button.
You may also select a surround mode for this source at the Audio
setting line, and you may adjust the volume level for this source at the
Level Adjustment setting line, but it is not necessary to make these
adjustments now. These settings only apply to the D-IN source.
You are now ready to begin enjoying the finest in home entertainment
with your HS 500 home theater system!