Hobart Welding Products H-9B Gun - Manual (Page 15)

OM-225 333 Page 11
5-4. Replacing Switch/Handle
Y Turn Off welding power source.
Disconnect switch leads and remove
switch. Connect leads to new switch
(polarity is not important). Be sure
trigger is properly installed into trigger
slot. Reassemble in reverse order.
Ref. 804 241-A / 804 242-A
Twist top and bottom handle locking rings
counterclockwise 1/4 turn. Slide bottom ring
down cable and top ring forward over head
tube. Separate gun handle halves.