Hitachi CP-X327W - Manual (Page 35)

ENGLISH
PICTURE 1 Menu
PICTURE 2 Menu
With the PICTURE 1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
With the PICTURE 2 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
Item Description
COLOR BAL R Adjust Red Color Balance: Dark Light
COLOR BAL B Adjust Blue Color Balance: Dark Light
SHARPNESS Adjust Sharpness (for VIDEO/S-VIDEO): Clear Soft
COLOR
Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):
Dark
Light
TINT Adjust Tint (for VIDEO/S-VIDEO): Green Red
PICTURE1 Menu
Item Description
V POSITION Adjust Vertical Position (for RGB): Up Down
H POSITION Adjust Horizontal Position (for RGB): Left Right
H PHASE
Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):
Right
Left
• Adjust to eliminate flicker.
H SIZE
Adjust Horizontal Size (for RGB): Large Small
• If the horizontal size adjustment is excessive, the image may not be displayed
correctly. In such a case, initialize H SIZE with the RESET button.
OVER SCAN
Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):
LARGE
MIDDLE SMALL
• It is recommended to select SMALL to avoid flicker at the lower part of the
picture.
3
PICTURE2 Menu
Example : PICTURE1 Menu
(COLOR BAL R)
Example : PICTURE2 Menu
(V POSITION)
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
12
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTION V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
12