Document Outline

• PPC-155T
  • Chapter 1 General Information
    • 1.1 Introduction
    • 1.2 Specifications
      • Table 1.1: Touchscreen specifications
    • 1.3 Dimensions
      • Figure 1.1 Dimensions of PPC-155T
  • Chapter 2 System Setup
    • 2.1 A Quick Tour of the Panel PC
      • Figure 2.1 Front panel of PPC-155T
      • Figure 2.2 Left side view of the panel PC
      • Figure 2.3 I/O Peripheral Connectors Panel
      • Figure 2.4 Rear view of the panel PC
    • 2.2 Preparing for First-time Use
    • 2.3 Installation Procedures
      • 2.3.1 Connecting the power cord
      • 2.3.2 Connecting the keyboard and mouse
      • 2.3.3 Switching on the power
    • 2.4 Running the BIOS Setup Program
    • 2.5 Installing System Software
    • 2.6 Installing the Drivers
      • Figure 2.5 Drivers and Utilities on the CD-ROM
  • Chapter 3 Using the Panel PC
    • 3.1 Introduction
    • 3.2 CD-ROM Drive (optional )
      • Figure 3.1 Inserting and ejecting a CD-ROM
    • 3.3 PCMCIA
      • Figure 3.2 Inserting and ejecting a PCMCIA card
    • 3.4 PS/2 Mouse and Keyboard
    • 3.5 PCI Bus Expansion
      • Figure 3.3 PCI bus expansion
    • 3.6 Serial COM Ports
      • Figure 3.4 I/O ports
    • 3.7 VGA Port
    • 3.8 USB Ports
    • 3.9 Audio Interface
    • 3.10 Ethernet
    • 3.11 Front Bezel LED and Light Sensor
      • Figure 3.5 LED & light sensor
    • 3.12 Touchscreen (Optional)
  • Chapter 4 Hardware Installation
    • 4.1 Jumpers and Connectors
    • 4.2 Disassembling the Panel PC
      • Figure 4.1 Unfastening the HDD side cover
      • Figure 4.2 Unfastening the rear cover
      • Figure 4.3 Disconnecting the fan connector
      • Figure 4.4 The PPC without the Rear Cover
    • 4.3 Installing the 2.5" Hard Disk Drive
      • Figure 4.5 Fastening the HDD metal frame to the HDD
      • Figure 4.6 Plugging in the EIDE cable
      • Figure 4.7 Aligning the HDD frame
    • 4.4 Installing the Central Processing Unit (CPU)
      • Figure 4.8 Placing the CPU in the socket
      • Figure 4.9 Tightening the screws on the CPU
      • Figure 4.10 Placing the heatsink and fan on the CPU
      • Figure 4.11 Fastening the CPU module to the motherboard
    • 4.5 Installing the DDR SDRAM Memory Module
      • Figure 4.12 Placing the memory module in the DIMM
  • Chapter 5 Jumpers & Connectors
    • 5.1 Jumpers and Connectors
      • 5.1.1 Setting jumpers
      • 5.1.2 Jumpers
        • Table 5.1: PCI slot voltage setting (JP2)
        • Table 5.2: Clear CMOS (JP3)
        • Table 5.3: LVDS voltage setting (JP5)
        • Figure 5.1 Jumpers and connectors on the PPC-155T motherboard
      • 5.1.3 Connectors
        • PPC-155T connectors table
  • Chapter 6 Driver Installation
    • 6.1 Driver Installation
    • 6.2 Updating Driver Searching on the Advantech Website
  • Appendix A Disassembly
    • A.1 Disassembly Procedure
      • Figure A.1 Unfastening the HDD side cover
      • Figure A.2 Unfastening the rear cover
      • Figure A.3 Disconnecting the fan connector
      • Figure A.4 The PPC without the rear cover
      • Figure A.5 Removing the PCI riser card
      • Figure A.6 Unfastening the middle plate
      • Figure A.7 Removing the middle plate
      • Figure A.8 Unfastening the HDD module
      • Figure A.9 Removing the HDD
      • Figure A.10 Disconnecting the HDD cable
      • Figure A.11 Loosening the screws on the HDD bracket
      • Figure A.12 Loosening the screws on the CD-ROM module
      • Figure A.13 Pushing out the brace holding the CD-ROM
      • Figure A.14 Removing the fixed brace
      • Figure A.15 Unfastening the CD-ROM / PCMCIA slot cover
      • Figure A.16 Removing the CD-ROM / PCMCIA slot cover.
      • Figure A.17 Removing the CD-ROM module
      • Figure A.18 Disconnecting the CD-ROM connector
      • Figure A.19 Removing the CPU module
      • Figure A.20 Unfastening the CPU socket
      • Figure A.21 Removing the CPU
      • Figure A.22 Removing the SDRAM module
  • Appendix B PCI Card Size Limits
    • Figure B.1 PCI Card Dimensional Limits