Document Outline

• Washer-Extractors
  • Cabinet Freestanding Installation and Operating Instructions
• Table of Contents
• Safety Information
  • NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related.
  • Important Safety Instructions
    • 1. Read all instructions before using the washer.
    • 2. Refer to the GROUNDING INSTRUCTIONS in the INSTALLATION manual for the proper grounding of the washer.
    • 3. Do not wash textiles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.
    • 4. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
    • 5. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HY...
    • 6. Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. This is a safety rule for all appliances.
    • 7. Before the washer is removed from service or discarded, remove the door to the washing compartment.
    • 8. Do not reach into the washer if the wash drum is moving.
    • 9. Do not install or store the washer where it will be exposed to water and/or weather.
    • 10. Do not tamper with the controls.
    • 11. Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that the user understands and has the skills to carry out.
    • 12. To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source.
    • 13. Use washer only for its intended purpose, washing textiles.
    • 14. ALWAYS disconnect the washer from electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.
    • 15. Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain, electrical power and grounding must comply with local codes and be made by licensed personnel when required.
    • 16. To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable oil, cooking oil, machi...
    • 17. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.
    • 18. Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person.
    • 19. Replace worn power cords and/or loose plugs.
    • 20. Be sure water connections have a shut-off valve and that fill hose connections are tight. CLOSE the shut-off valves at the end of each wash day.
    • 21. Loading door MUST BE CLOSED anytime the washer is to fill, tumble or spin. DO NOT bypass the loading door switch by permitting the washer to operate with the loading door open.
    • 22. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precaution...
    • 23. Always follow the fabric care instructions supplied by the textile manufacturer.
    • 24. Never operate the washer with any guards and/or panels removed.
    • 25. DO NOT operate the washer with missing or broken parts.
    • 26. DO NOT bypass any safety devices.
    • 27. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.
    • NOTE: The WARNING and IMPORTANT SAFETY INSTRUCTIONS appearing in this manual are not meant to cover all possible conditions and ...
• Installation
  • General Specifications
    • V-Computer
    • SF18VNV, SF25VNV, UF18VNV, and UF25VNV Models
      • 737 (29.0)
      • 813 (32.0)
      • 1168 (46.0)
      • 1232 (48.5)
      • 833 (32.8)
      • 940 (37.0)
      • 250 (550)
      • 318 (700)
      • 250 (550)
      • 341 (750)
      • 0.98 (34.6)
      • N/A
      • 272 (600)
      • 363 (800)
      • 1.17 (41.44)
      • N/A
      • 533 (21.0)
      • 610 (24.0)
      • 349 (13.75)
      • 406 (16.0)
      • 78 (2.76)
      • 119 (4.19)
      • 4.77 (0.188)
      • 4,77 (0.188)
      • 23
      • 23
      • 8.16 (18)
      • 11.34 (25)
      • 305 (12.0)
      • 364 (14.345)
      • 518 (20.4)
      • 511 (20.1)
      • HOT
      • 87 (23)
      • 106 (28)
      • COLD
      • 42 (11)
      • 49 (13)
        • Table 1 (Continued)
      • 0.2
      • 0.3
      • 58
      • Data not available
      • 101 (400)
      • 113 (450)
      • 1
      • 1
      • 0.75 (1.0)
      • 1.50 (2.0)
      • 29
      • 27
      • 52
      • 49
      • 86
      • 73
      • 534
      • 500
      • 685
      • 641
      • 1080
      • 1011
      • 0.25
      • 0.80
      • 0.80
      • 0.80
      • 2.20
      • 1.80
      • 85
      • 85
      • 140
      • 140
      • 348
      • 348
      • AC drive
      • AC drive
      • DN15 (1/2 NPT)
      • DN15 (1/2 NPT)
      • 1
      • 1
      • LOW
      • 0.81 (1.13)
      • 1.05 (1.46)
      • MED
      • 0.90 (1.25)
      • 1.16 (1.61)
      • HIGH
      • 1.04 (1.45)
      • 1.33 (1.85)
      • 11.7 (0.75)
      • 15 (0.96)
        • WE-6 Computer
    • SF35PV, SF50PV, SF85PV, UF35PV, UF50PV, and UF85PV Models
      • 889 (35)
      • 990 (39)
      • 1181 (46.5)
      • 1407 (55.4)
      • 1514 (59.6Z)
      • 1781 (70.1)
      • 992 (39)
      • 1049 (41.3)
      • 1270 (50)
      • 550 (1212)
      • 726 (1600)
      • 1362 (3000)
      • 572 (1260)
      • 749(1650)
      • 1407 (3100)
      • 1.80 (63.6)
      • 2.26 (80)
      • 3.46 (123)
      • 580 (1275)
      • 1750 (795)
      • 3200 (1453)
      • 1.85 (65.3)
      • 2.36 (83.5)
      • 3.86 (137)
      • 668 (26.25)
      • 762 (30)
      • 914 (36)
      • 467 (18.375)
      • 508 (20)
      • 61 (240)
      • 164 (5.79)
      • 232 (8.19)
      • 400 (14.1)
      • 0.188 (4.77)
      • 0.188 (4.77)
      • 4.77 (0.188)
      • 23
      • 23
      • 23
      • 354 (13.9)
      • 413 (16.25)
      • 445 (17.5)
      • 636 (25)
      • 23 (585)
      • 32.7 (831)
      • 47 (178)
      • 216 (57)
      • 407 (108)
      • 79 (21)
      • 98 (26)
      • 190 (50)
      • 276 (73)
      • 322 (85)
      • 579 (153)
      • 0.4
      • 0.6
      • 0.9
      • 125 (500)
      • 213 (850)
      • 300 (1200)
      • 70
      • 76
      • 75
      • 54
      • 49
      • 55
      • 1
      • 1
      • 1
      • 2.2 (3)
      • 3.7 (5.0)
      • 5.6 (7.5)
        • Table 2 (Continued)
      • Table 2 (Continued)
      • 26
      • 26
      • 26
      • 43
      • 40
      • 41
      • 77
      • 73
      • 65
      • 325
      • 305
      • 280
      • 475
      • 445
      • 410
      • 610
      • 575
      • 525
      • 960
      • 900
      • 825
      • 0.25
      • 0.29
      • 0.345
      • 0.69
      • 0.68
      • 0.858
      • 2.2
      • 2.3
      • 2.16
      • 40
      • 40
      • 40
      • 85
      • 84
      • 85.8
      • 140
      • 141
      • 141
      • 345
      • 345
      • 348
      • Standard
      • Standard
      • Standard
      • DN15 (0.5)
      • DN15 (0.5)
      • DN15 (0.5)
      • 1
      • 1
      • 1
      • 2.22 (1.6)
      • 2.91 (2.42)
      • 3.8 (5.2)
      • 2.52 (1.81)
      • 2.42 (3.46)
      • 4.3 (5.9)
      • 2.84 (2.04)
      • 2.73 (3.80)
      • 4.9 (6.9)
      • 1.47 (23)
      • 1.95 (30.6)
      • 54.9 (3.5)
      • 15.6
      • 23.4
      • 31.2
      • 6
      • 9
      • 12
      • 2.6
      • 2.6
      • 2.6
      • 3.9 (2.6)
      • 3.6 (2.4)
      • 3.1 (4.8)
      • 4.5 (2.9)
      • 4.2 (2.7)
      • 3.5 (5.4)
      • 5.0 (3.3)
      • 4.7 (3.1)
      • 6.4 (4.1)
    • SF135PV, SF250PV, UF135PV, and UF250PV Models
      • 1803 (71)
      • 1957 (77)
      • 2006 (79)
      • 2006 (79)
      • 1829 (75)
      • 2083 (82)
      • 2235 (88)
      • 2235 (88)
      • 1537 (60.5)
      • 2235 (88)
      • 2243 (88.3)
      • 2311 91()
      • 1818 (4000)
      • 3661 (8070)
      • 4000 (8800)
      • 4355 (9600)
      • 1909 (4200)
      • 3951 (8270)
      • 4000 (8800)
      • 4445 (9800)
      • 6.35 (227)
      • 11.5 (409)
      • 11.5 (409)
      • 11.5 (409)
      • 2045 (4500)
      • 3860 (8500)
      • 4227 (9300)
      • 4581 (10,100)
      • 6.39 (248)
      • 11.5 (409)
      • 11.5 (409)
      • 11.5 (409)
      • 1092 (43)
      • 1321 (52)
      • 1321 (52)
      • 1321 (52)
      • 635 (25)
      • 813 (32)
      • 813 (32)
      • 813 (32)
      • 596 (21.0)
      • 1114 (39.3)
      • 1114 (39.3)
      • 1114 (39.3)
      • 4.77 (0.188)
      • 4.76 (0.188)
      • 4.76 (0.188)
      • 4.76 (0.188)
      • 23
      • 20
      • 20
      • 20
      • 584 (23)
      • 724 (28.5)
      • 724 (28.5)
      • 724 (28.5)
      • 718 (28.25)
      • 784 (30.9)
      • 937 (36.9)
      • 937 (36.9)
      • 590 (156)
      • 905 (239)
      • 905 (239)
      • 905 (239)
      • 437 (116)
      • 424 (112)
      • 424 (112)
      • 424 (112)
      • 1023 (270)
      • 1355 (358)
      • 1355 (358)
      • 1355 (358)
      • 0.9
      • 1.5 (Est.)
      • 1.5 (Est.)
      • 1.5 (Est.)
      • 375 (1500)
      • 550 (2200)
      • 550 (2200)
      • 550 (2200)
      • 75
      • 75
      • N/A
      • N/A
      • 1
      • 1
      • 1
      • 1
      • 7.5 (10)
      • 18.5 (25)
      • 18.5 (25)
      • 18.5 (25)
        • Table 3 (Continued)
      • Table 3 (Continued)
      • 26
      • 21
      • 21
      • 21
      • 36
      • 31
      • 31
      • 31
      • 62
      • 54
      • 54
      • 54
      • 170
      • 140
      • 140
      • 140
      • 375
      • 340
      • 340
      • 340
      • 480
      • 435
      • 435
      • 435
      • 715
      • 650
      • 650
      • 650
      • 0.412
      • 0.325
      • 0.325
      • 0.325
      • 0.790
      • 0.708
      • 0.708
      • 0.708
      • 2.34
      • 2.15
      • 2.15
      • 2.15
      • 17.6
      • 14.7
      • 14.7
      • 14.7
      • 85.8
      • 86.9
      • 86.9
      • 86.9
      • 141
      • 142
      • 142
      • 142
      • 312
      • 318
      • 318
      • 318
      • Standard
      • Standard
      • Standard
      • Standard
      • DN19 (0.75)
      • DN25 (1.0)
      • DN25 (1.0)
      • DN25 (1.0)
      • 1
      • 1
      • 1
      • 1
      • 3.11 (6.84)
      • 5.23 (11.5)
      • 5.23 (11.5)
      • 5.23 (11.5)
      • 4.40 (9.67)
      • 7.91 (17.4)
      • 17.4 (7.91)
      • 17.4 (7.91)
      • 4.78
      • 9.0
      • 9.0
      • 9.0
      • 45
      • N/A
      • N/A
      • N/A
      • 18
      • N/A
      • N/A
      • N/A
      • 2.5
      • N/A
      • N/A
      • N/A
      • 5.0 (3.2)
      • N/A
      • N/A
      • N/A
      • 6.4 (4.2)
      • N/A
      • N/A
      • N/A
  • Dimensional Clearances
    • NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing toleran...
      • V-Computer
    • SF18VNV, SF25VNV, UF18VNV, and UF25VNV Models
      • 305 (12)
      • 305 (12)
      • 50 (2)
      • 50 (2)
      • 25 (1)
      • 25 (1)
      • 406 (16)
      • 445 (17.5)
        • Table 4
        • WE-6 Computer
    • SF35-85PV, UF35-85PV, SF135-250PV, and UF135-250PV Models
      • 450 (18)
      • 450 (18)
      • 450 (18)
      • 610 (24)
      • 610 (24)
      • 914 (36)
      • 914 (36)
      • 150 (6)
      • 150 (6)
      • 150 (6)
      • 457 (18)
      • 457 (18)
      • 457 (18)
      • 457 (18)
      • 25.4 (1)
      • 25.4 (1)
      • 25.4 (1)
      • 457 (18)
      • 457 (18)
      • 457 (18)
      • 457 (18)
      • 533 (21)
      • 584 (23)
      • 584 (23)
      • 584 (23)
      • 914 (36)
      • 914 (36)
      • 914 (36)
        • Table 5
  • Dimensions
    • V-Computer
    • SF18VNV, UF18VNV, SF25VNV, and UF25VNV Models
      • A
      • Figure 1
        • 659 mm (26 in.)
        • 686 mm (27 in.)
        • 492 mm (19-13/32 in.)
        • 508 mm (20 in.)
        • 440 mm (17-5/16 in.)
        • 432 mm (17 in.)
        • 1161 mm (45-23/32 in.)
        • 1232 mm (48-1/2 in.)
        • 686 mm (27 in.)
        • 762 mm (30 in.)
        • 737 mm (29 in.)
        • 813 mm (32 in.)
        • 18 mm (23/32 in.)
        • 18 mm (23/32 in.)
        • 1143 mm (45 in.)
        • 1214 mm (47-13/16 in.)
        • 25 mm (1 in.)
        • 25 mm (1 in.)
        • 774 mm (30-1/2 in.)
        • 876 mm (34-1/2 in.)
        • 709 mm (27-15/16 in.)
        • 816 mm (32-1/8 in.)
        • 33 mm (1-5/16 in.)
        • 38 mm (1-1/2 in.)
        • 530 mm (20-29/32 in.)
        • 597 mm (23-1/2 in.)
        • 430 mm (16-29/32 in.)
        • 495 mm (19-1/2 in.)
        • 1074 mm (42-5/16 in.)
        • 1074 mm (42-5/16 in.)
        • 173 mm (6-13/16 in.)
        • 211 mm (8-5/16 in.)
        • 86 mm (3-13/32 in.)
        • 86 mm (3-13/32 in.)
        • 1029 mm (40-1/2 in.)
        • 1067 mm (42 in.)
        • 114 mm (4-1/2 in.)
        • 4-13/16 in. (122 mm)
          • WE-6 Computer
    • SF35PV and UF35PV Models
      • Front
      • 1
      • 4
      • 2
      • 5
      • 3
      • Figure 2
    • SF50PV, UF50PV, SF85PV, and UF85PV Models
      • Front
      • 1
      • 4
      • 2
      • 5
      • 3
      • Figure 3
        • 872 mm (34-3/10 in.)
        • 1054 mm (41-1/2 in.)
        • 26-1/5 in. (666 mm)
        • 831 mm (32-7/10 in.)
        • 582 mm (22-9/10 in.)
        • 765 mm (30-1/10 in.)
        • 991 mm (39 in.)
        • 1181 mm (46-1/2 in.)
        • 1049 mm (41-3/10 in.)
        • 1270 mm (50 in.)
        • 930 mm (36-3/5 in.)
        • 1107 mm (43-3/5 in.)
        • 889 mm (35 in.)
        • 1083 mm (42-3/5 in.)
        • 619 mm (24-2/5 in.)
        • 758 mm (29-9/10 in.)
        • 1513 mm (59-3/5 in.)
        • 1781 mm (70-1/10 in.)
        • 1399 mm (55-1/10 in.)
        • 1685 mm (66-2/5 in.)
        • 260 mm (10-1/5 in.)
        • 254 mm (10 in.)
        • 260 mm (10-1/5 in.)
        • 197 mm (7-3/4 in.)
        • 300 mm (11-4/5 in.)
        • 281 mm (11-1/10 in.)
        • 1136 mm (44-7/10 in.)
        • 1328 mm (52-3/8 in.)
    • 135 Pound Capacity Models
      • 1
      • 6
      • 2
      • 7
      • 3
      • 8
      • 4
      • 9
      • 5
      • 10
      • Figure 4
    • 250 Pound Capacity Models
      • 1
      • 6
      • 2
      • 7
      • 3
      • 8
      • 4
      • 9
      • 5
      • 10
      • Figure 5
    • 250 Pound Capacity Models with Forward Tilt or Two-Way Tilt Option
      • A
      • 1
      • 6
      • 2
      • 7
      • 3
      • 8
      • 4
      • 9
      • 5
      • Figure 6
        • 2235 mm (88 in.)
        • 2235 mm (88 in.)
        • 1736 mm (74-13/32 in.)
        • 1736 mm (74-13/32 in.)
        • 1930 mm (76 in.)
        • 1930 mm (76 in.)
        • 2057 mm (81 in.)
        • 2006 mm (79 in.)
        • 936 mm (36-7/8 in.)
        • 936 mm (36-7/8 in.)
        • 981 mm (38-19/32 in.)
        • 981 mm (38-5/8 in.)
        • 1359 mm (53-1/2 in.)
        • 1359 mm (53-1/2 in.)
        • 2037 mm (80-3/16 in.)
        • 2037 mm (80-3/16 in.)
        • 721 mm (28-3/8 in.)
        • 721 mm (28-3/8 in.)
        • 559 mm (22 in.)
        • 559 mm (22 in.)
        • 2254 mm (88-3/4 in.)
        • 2311 mm (91 in.)
        • 1174 mm (68-11/16 in.)
        • 1174 mm (68-11/16 in.)
        • 1639 mm (64-1/2 in.)
        • 1639 mm (64-1/2 in.)
        • 1615 mm (63-5/8 in.)
        • 1615 mm (63-5/8 in.)
        • 1198 mm (47-3/16 in.)
        • 1198 mm (47-3/16 in.)
        • 1096 mm (43-3/16 in.)
        • 1096 mm (43-3/16 in.)
        • 912 mm (35-29/32 in.)
        • 912 mm (35-29/32 in.)
        • 712 mm (28 in.)
        • 712 mm (28 in.)
        • 2121 mm (83-1/2 in.)
        • 2121 mm (83-1/2 in.)
        • 1930 mm (76 in.)
        • 1930 mm (76 in.)
        • 1613 mm (63-1/2 in.)
        • 1613 mm (63-1/2 in.)
        • 620 mm (24-13/32 in.)
        • 620 mm (24-13/32 in.)
        • 620 mm (24-13/32 in.)
        • 620 mm (24-13/32 in.)
        • 370 mm (14-5/8 in.)
        • 370 mm (14-5/8 in.)
        • 1683 mm (66-1/4 in.)
        • 1683 mm (66-1/4 in.)
        • 1737 mm (68-3/8 in.)
        • 1737 mm (68-3/8 in.)
        • 2149 mm (84-5/8 in.)
        • 2149 mm (84-5/8 in.)
    • 250 Pound Capacity Models with Forward and Two-Way Tilt Option
      • 13˚
      • Figure 7
• Operation
  • V-Computer
    • 1. Turn on main power source (circuit breaker).
    • 2. Turn on the ON/OFF switch on the front panel to the ON position. Refer to Figure 9.
    • 3. Push button and turn handle clockwise. Refer to Figure 8.
      • Figure 8
    • 4. Press and hold the DOOR UNLOCK button on the left side of the control panel while performing the above step. Refer to Figure 8 and Figure 9.
    • 1
    • 1
    • 2
      • Figure 9
      • 5. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 10.
        • Figure 10
      • 6. Close door and turn handle counterclockwise until button pops out. Refer to Figure 11.
        • Figure 11
      • 7. Add liquid and/or powder supplies to supply dispenser. Refer to Figure 12.
        • a. Add detergent to container 1.
        • b. Add detergent or bleach to container 2.
        • c. Add softener to container 3.
    • NOTE: Liquid supplies may be injected directly into the supply dispenser by an external chemical supply dispenser. Refer to Installation and Programming manuals.
      • 8. Press the START key. Refer to Figure 13.
      • 1
      • 1
      • 2
      • 3
        • Figure 12
        • 9. Press the UP and DOWN keys to select wash cycle. Press the START key. Refer to Figure 13.
      • 1
      • 1
      • 2
      • 3
      • 4
        • Figure 13
        • 10. When applicable, add bleach when the display reads “bLCH”. Refer to Figure 14.
          • Figure 14
    • NOTE: To stop a cycle at any time, press the STOP key.
    • NOTE: To display the temperature of the water while a cycle is running, press the UP key. To display the number of the cycle in progress, press the START key.
  • WE-6 Computer
    • 1. Turn on main power source (circuit breaker).
    • 2. Use left hand to press and hold the door unlock button on top of the door box cover. Use right hand to turn door handle counterclockwise and open door. Refer to Figure 15.
      • Figure 15
    • 3. Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 16.
      • Figure 16
    • NOTE: For models with tilt, refer to “Loading Using Tilt Option” at the end of this section.
      • 4. Close door and turn handle clockwise until it locks.
      • 5. Add powder supplies to supply dispenser.
    • NOTE: Liquid supplies may be injected directly into the supply dispenser by an external chemical supply dispenser. Refer to Installation and Programming manuals.
      • 6. Select wash cycle from cycle charts located in the Programming section of the Programming Manual.
      • 7. Enter the cycle number, 01-39, on the keypad. Refer to Figure 17.
        • Figure 17
      • 8. Press the START key. Refer to Figure 17.
      • 9. When cycle is complete and the display reads “DONE”, open door by pressing and holding the door unlock button.
      • 10. Unload.
      • Loading Using Tilt Option
    • Two-Way Tilt Machines
      • 1. Open loading door and secure it to the door latch on the right side of the machine.
      • 2. Turn the selector on the pendant switch left to the REVERSE position. Refer to Figure 18.
      • 1
      • 1
        • Figure 18
        • 3. While holding down the ENABLE button, press the REVERSE button to tilt backward.
        • 4. Load the machine.
        • 5. Turn the selector back to the CENTER position to lower the machine.
        • 6. Unlatch and close loading door.
    • Forward Tilt Machines
      • 1. Open loading door and secure it to the door latch on the right side of the machine.
      • 2. Check that selector on the pendant switch is in the CENTER position. If machine is in the FORWARD position, turn the selector to the CENTER position. While holding down the ENABLE button, press the REVERSE button to center the machine.
      • 3. Load the machine.
      • 4. Unlatch and close loading door.
      • Unloading Using Tilt Option
    • Forward and Two-Way Tilt Machines
      • 1. Open loading door and secure it to the door latch on the right side of the machine.
      • 2. Turn the selector on the pendant switch right to the FORWARD position. Refer to Figure 18.
      • 3. While holding down the ENABLE button, press the FORWARD button to tilt forward.
      • 4. Unload the machine.
      • 5. Turn the selector back to the CENTER position to lower the machine.
      • 6. Unlatch and close loading door.
• Disposal of Unit
  • Figure 19