Document Outline

• T-Series Rigging manual (1.1 EN)
  • 1. Safety precautions
    • 1.1. Intended use
      • 1.1.1. Load capacity/System safety
      • 1.1.2. ArrayCalc / TI 385
    • 1.2. Operational safety
• 2. T-Series rigging concept
  • 2.1. Z5370 T Flying frame
    • 2.1.1. System components overview
    • 2.1.2. Flying frame dimensions
    • Dimensions of the inclinometer mounting plate
  • 2.2. T-Series Locking pins
    • Assembly
  • 2.3. T Load adapter
    • Assembly
  • 2.4. T-Series cabinets
    • 2.4.1. Altering the HF dispersion on T10 cabinets
    • 2.4.2. Functionality of the cabinet's rigging mechanism
    • Front link mechanism
    • Splay/Rear link mechanism
    • Preset splay angles on T10 cabinets
    • Interconnecting the cabinets
    • Front links
    • Splay / Rear links
  • 2.5. E7451/53 Touring cases
    • E7451 Touring case 4 x T10 assembly
    • E7453 Touring case 2 x T-SUB assembly
• 3. Preparing the setup
  • 3.1. General
  • 3.2. Inspections
  • 3.3. Suspension of the Flying frame
    • 3.3.1. Single pickpoint operation
    • Attaching the Load adapter
    • Attaching the cable pick
    • 3.3.2. Dual pickpoint operation
    • Attaching the Load adapter(s)
    • Attaching the cable pick
  • 3.4. Secondary safety
    • Secondary safety at the Flying frame
    • Assembly
    • 2-leg safety wire
    • Safety chains
  • 3.5. Horizontal aiming and securing
• 4. T-Series arrays and assembly
  • 4.1. Flown arrays
    • 4.1.1. T10 Array
    • Limitation
    • Preparations
    • Order of assembly
    • 1. Suspend the Flying frame
    • 2. Prepare the first T10 cabinet
    • 3. Attach the Flying frame to the first T10 cabinet
    • 4. Add further T10 cabinets
    • 5. Rig the cabling
    • 6. Check the assembly
    • 7. Derig the array
    • 4.1.2. T-SUB Column
    • Limitation
    • Preparations
    • Order of assembly
    • 1. Suspend the Flying frame
    • 2. Prepare the first T-SUB cabinet
    • 3. Attach the Flying frame to the first T-SUB cabinet
    • 4. Add the next T-SUB cabinet
    • 5. Rig the cabling
    • 6. Check the assembly
    • 7. Derig the array
    • 4.1.3. T-SUB/T10 Array
    • Preparations
    • Order of assembly
    • 1. Suspend the Flying frame
    • 2. Attach the T-SUB cabinets
    • 3. Prepare the first T10 cabinet
    • 4. Attach the first T10 cabinet
    • 5. Add further T10 cabinets
    • 6. Rig the cabling
    • 7. Check the assembly
    • 8. Derig the array
    • 4.1.4. Setup of the E7451 Touring case assembly
    • E7451 Touring case 4 x T10 assembly
    • Preparations
    • Order of assembly
    • 1. Suspend the Flying frame
    • 2. Prepare the T10 cabinets in the touring case
    • 3. Attach the Flying frame to the assembly
    • 4. Attach the next assembly
    • 5. Rig the cabling
    • 6. Check the assembly
    • 7. Derig the array
    • E7451 Touring case assembly below T-SUB cabinets
  • 4.2. T-Series ground stacks
    • 4.2.1. T10 ground stack
    • Limitation
    • Preparations
    • Order of assembly
    • 1. Prepare the Flying frame
    • 2. Prepare the first T10 cabinet
    • 3. Attach the first T10 cabinet
    • 4. Set vertical aiming of the first T10 cabinet
    • 5. Add further T10 cabinets
    • 6. Rig the cabling
    • 7. Check the assembly
    • 8. Derig the ground stack
    • 4.2.2. T-SUB/T10 ground stack
    • Limitation
    • Preparations
    • Order of assembly
    • 1. Stack the two T-SUB cabinets
    • 2. Attach the first T10 cabinet
    • 3. Set vertical aiming of the first T10 cabinet
    • 4. Add further T10 cabinets
    • 5. Rig the cabling
    • 6. Check the assembly
    • 7. Derig the ground stack
    • 4.2.3. T-SUB stacks
• 5. Checklist for the assembly of T-Series arrays
  • 5.1. System and safety checks
    • 5.1.1. Flown arrays
    • 5.1.2. Ground stacks
    • 5.1.3. Wiring
  • 5.2. Hoisting and securing the array
• 6. Wind loads
• 7. Care and maintenance / Disposal
  • 7.1. Transport / Storing
  • 7.2. Visual and functional inspection
    • Cabinet enclosure
    • Locking pins
    • Front and Splay (Rear) links
    • Flying frame
    • Load adapter
  • 7.3. Disposal
• EC Declaration of Conformity