Document Outline

• Screen Map
• TERMS AND CONDITIONS OF SALE
• RETURN GOODS POLICY
• UNPACKING THE INSTRUMENT
• INSTRUCTION MANUAL REVISION
• 1.0 GENERAL DESCRIPTION
  • 1.1 FEATURES
  • 1.2 SPECIFICATIONS
    • 1.2.1 Input specification
    • 1.2.2 Input Ranges
    • 1.2.3 Accuracy
    • 1.2.4 Output Signals
    • 1.2.5 Contact Relays
    • 1.2.6 Display
    • 1.2.7 Enclosure
    • 1.2.8 Power
    • 1.2.9 Environmental Conditions
    • 1.2.10 Shipping
  • 1.3 Model Codes
• 2.0 INSTALLATION
  • 2.1 MOUNTING
  • 2.2 WIRING
    • 2.2.1 Wiring, power
    • 2.2.2 Wiring, Sensor
    • 2.2.3 Wiring, 4-20 mA Outputs
    • 2.2.4 Wiring, Contact Relay Outputs
    • 2.2.5 Wiring, Serial Output MODBUS RTU
• 3.0 OPERATION
  • 3.1 KEYS
    • 3.1.1 Home/Exit Key
    • 3.1.2 Back/Hold Key
    • 3.1.3 Selection Adjustment Keys
    • 3.1.4 Alpha Numeric Entry
  • 3.2 MENU STRUCTURE
    • 3.2.1 HOLD (Output Hold)
    • 3.2.2 CAL (Calibration Menu)
    • 3.2.3 CONFIG (Configuration Menu)
    • 3.2.4 INFO (Information Menu)
    • 3.2.5 SIM (Simulation Menu)
    • 3.2.6 Fault Screens
    • 3.2.7 SENTINEL® Screens
      • Configure SENTINEL Function
  • 3.3 START UP GUIDE
    • 3.3.1 Configure 4-20 mA output range
    • 3.3.2 Configure 4-20 mA Fault Condition and Cal
    • 3.3.3 Configure Alarm Relays (Relays Optional)
    • 3.3.4 Exit Menus and Return to Main Display
    • 3.3.5 Sensor Start Up
  • 3.4 USER SELECTABLE OPTIONS
    • 3.4.1 Screen Lighting
    • 3.4.3 Graphical display
    • 3.4.4 TAG Transmitter Name
    • 3.4.5 SENSOR Name
    • 3.4.6 Password Protection
• 4.0 CALIBRATION
  • 4.0.1 AUTO Calibration description
  • 4.0.2 STANDardize Calibration description
  • 4.0.3 MANUAL Calibration description
  • 4.1 pH Calibration Procedures
    • 4.1.1 AUTO Cal using pH 4.01, 7.00, 10.00 buffers
    • 4.1.2 AUTO Cal using other pH buffers
    • 4.1.3 Standardize
  • 4.2 ORP Calibration Procedures
    • 4.2.1 Auto Cal with Quinhydrone
    • 4.1.2 Standardize
  • 4.3 pION Calibration Procedures
    • 4.3.1 AUTO Cal using 1, 10, 100 ppm solutions
    • 4.3.2 AUTO Cal using non-decimal ppm solutions
    • 4.3.3 Standardize
  • 4.4 S80/DO90 DISSOLVED OXYGEN Calibration Procedures
    • 4.4.1 AUTO Cal using zero ppm solution and Air
    • 4.4.2 Standardize
    • 4.4.3 Manual Cal
  • 4.5 TRITON® Dissolved Oxygen Calibration Procedures
    • 4.5.1 AUTO Cal using zero ppm solution and Air
    • 4.5.2 Standardize
  • 4.6 TRITON® TR6 Turbidity/Suspended Solids Sensor
    • 4.6.1 AUTO Cal
    • 4.6.2 Standardize
    • 4.6.3 MANUAL Cal
  • 4.7 Conductivity Sensors
    • 4.7.1 AUTO Cal using Air and Conductivity Standard
    • 4.7.2 Standardize
  • 4.8 TDS Conductivity Sensors
    • 4.8.1 Standardize
  • 4.9 Resistivity Sensors
    • 4.9.1 AUTO Cal using Air and Meg-Ohm process water
    • 4.9.2 Standardize
• 5.0 MAINTENANCE
  • 5.1 CLEANING
• 6.0 TROUBLESHOOTING
• 7.0 PARTS AND ACCESSORIES
  • 7.1 Front Panel Control Board Exploded
  • 7.2 Front Panel Control Board Exploded, with Relays
  • 7.3 Transmitter Case, back with Cable Glands
  • 7.4 Replacement Parts
  • 7.5 Accessories
• 8.0 S80 SENSORS
  • 8.1 S80 Installation
    • 8.1.1 Insertion
    • 8.1.2 Immersion
    • 8.1.3 Flow through
    • 8.1.4 Valve Retractable
    • 8.1.5 Flange fittings
  • 8.2 S80 Part Number Configurator
  • 8.3 TRITON® DO80 Sensors
  • 8.4 TRITON® TR6 Sensors
  • 8.3 S80 Sensor Maintenance
    • 8.3.1 Electrode Cartridge Installation
    • 8.3.2Electrode Cartridge Replacement
    • 8.3.3 Electrode Cleaning
    • 8.3.4 pH Electrode Cartridge Cleaning
    • 8.3.5 ORP Electrode Cartridge Cleaning
    • 8.3.6 pIon Electrode Cartridge Cleaning
    • 8.3.7 Dissolved Oxygen Cartridges
    • 8.3.8 TRITON DO80 Dissolved Oxygen
      • 8.3.8.1 Replacing the Fluorescent Cap
    • 8.3.9 TRITON TR6 Turbidity
    • 8.3.10 Conductivity and Resistivity sensors
  • 8.4 S80 Sensor Specifications
    • 8.4.1 pH electrodes
    • 8.4.2 ORP Electrodes
    • 8.4.3 Dissolved Oxygen
    • 8.4.4 Ammonium Electrode
    • 8.4.5 Bromide Electrode
    • 8.4.6 Calcium Electrode
    • 8.4.7 Chloride Electrode
    • 8.4.8Cupric Electrode
    • 8.4.9 Cyanide Electrode
    • 8.4.10 Fluoride Electrode
    • 8.4.11 Potassium Electrode
    • 8.4.12 Silver Electrode
    • 8.4.13 Sodium Electrode
    • 8.4.14 Sulfide Electrode
    • 8.4.15 TRITON® DO80
    • 8.4.16 TRITON® TR6
• APPENDIX
  • A. Auto Cal Buffer Tables
  • B. T80 HART Menu
  • D.MODBUS RTU Register Listing
    • 03 (0x03) Read Holding Registers
    • 06 (0x06) Write Single Register
    • Registers
    • Fault Status
    • Warning Status
    • Sensor Type
  • E. Resistivity Temperature Compensation
  • F. SOFTWARE HISTORY